Miragrid Geogrids
Miragrid® geogrids can be used in most MSE applications for soil reinforcement including internally reinforced soil walls, segmental retaining wall reinforcement, steep reinforced slopes, and reinforcement in a variety of landfill applications including potential voids, bridging and veneer stability. When a project specifies for long-term design strength for structure stability use Miragrid® geogrids.
Description
Miragrid® 2XT
This is a bi-axial product, meaning it has approximately the same strength in both directions therefore can be laid in either direction.
Tensile Strength (at ultimate) ASTM D 6637 kn/m (lbs/ft) 29.2 (2000) 29.2 (2000)
This is a bi-axial product, meaning it has approximately the same strength in both directions therefore can be laid in either direction.
Tensile Strength (at ultimate) ASTM D 6637 kn/m (lbs/ft) 29.2 (2000) 29.2 (2000)
Miragrid® 5XT
This is a uni-axial product, meaning it must be laid in the machine direction.
Tensile Strength (at ultimate) ASTM D 6637 kn/m (lbs/
ft) 68.6 (4700)
This is a uni-axial product, meaning it must be laid in the machine direction.
Tensile Strength (at ultimate) ASTM D 6637 kn/m (lbs/
ft) 68.6 (4700)
Miragrid® 3XT
This is a uni-axial product, meaning it must be laid in the machine direction.
Tensile Strength (at ultimate) ASTM D 6637 kn/m (lbs/
ft) 51.1 (3500)
This is a uni-axial product, meaning it must be laid in the machine direction.
Tensile Strength (at ultimate) ASTM D 6637 kn/m (lbs/
ft) 51.1 (3500)